Waterborne Epoxy Primer
Basic Info
Model No.: Waterborne Epoxy White Primer
Product Description
Specifications 2k Epoxy Primer/Granite Epoxy Resin/Epoxy Resin 828
abrasion resistance property
Great adhesive force
impact resistance
2k epoxy primer /granite epoxy resin/epoxy resin 828
Product Description Waterborne Epoxy White Primer Product Introduction Waterborne epoxy white primer has strong adhesion, low VOC and small odor. It’s safe, environmental, non-toxic, and has loose demand on construction environment. Technical Data Viscosity: 900-1500 m Pa·s Solid content:45-55% pH:8-9 Product Advantage 1. Excellent mechanical properties, e.g. 0 H of adhesion, 2 to 3 H of hardness. 2. Good adhesion between the layers. 3. Easy to control during construction. 4. Waterborne, non-toxic, environmental. Application The chassis of electronic products, e.g. mobile phone, computer. Applicable Range The chassis made of aluminum or magnalium. Construction Condition 1. Substrate: make sure there is no greasy dirt nor dust on the substrate of aluminum or magnalium (passivated or not passivated). 2. The temperature should be 5°C or higher, the relative humidity should be 85% or less. Construction Technology 1. Clean the substrate Clear greasy dirt on the surface away with cleaning agent or alcohol. 2. Paint waterborne epoxy white primer Knife coating or spray coating according to the required thickness. 3. As for the not passivated substrate, bake it under 150°C for 5 minutes, then let it be air dry. For the passivated substrate, let it be cured under room temperature. Attention 1. The greasy dirt on the substrate should be cleaned away. Otherwise, the adhesion will be influenced. 2. When knife coating or spray coating, the painting amount should be based on the required thickness 30-35um. Otherwise, too thin film decrease the adhesion. 3. Before paint, stir component A to be level, then match A with B strictly with the ratio A:B=4:1, mix them evenly. Use it after 3 to 5 minutes. 4. The amount for stirring once should be controlled based on the practical construction speed. Too much amount is not advisable. The paint should be run out in one hour. The leftover paint cannot be poured back into the original package. Otherwise, the coating will be thicker and out of run. Packaging & Shipping Package and Storage A component: 20 kg plastic drum B component: 5 kg plastic drum They should be stored under dry,shadow and cool place and the expiry date is 12 monthes under the normal temperature(20 °C/68 ) Our Services Sample-free for your testing, we also supply perfect tech-support, before-sale&after-sale service, tech-guide service etc.. if our products happen problems, we will undertake responsibility ourself. Company Information Tianyi Chemical Engineering Material Co., Ltd is an import&export science and technology intensive enterprise which focuses on researching and applications of silica dioxide powder. It is located in the prosperous and famous town of coatings ---Shunde,Guangdong,China. Adhering to the principle “Quality first, credit standing paramountcy, self-discipline and social commitment and integrity-based”, Tianyi Chemical specializes in independent R&D, application, production and sale of Matting agent, fumed silica, Zinc Stearate, water-base synthetic resins. It has become representative of excellent enterprises of researching&application in china and one of the main suppliers of chemical raw materials for coating and oil ink in china. Developed from the begining, Tianyi chemcial has been always carring on the marketing conception of “Technology leads sales”. Throughout years’ efforts, overseas sales centers, five big china domestic sales centers and a number of highly qualified sales teams are established. Our powder products sales amounted to 30,000 tons each year and aqueous synthetic resins (including waterbase polyurethane resins, waterbase epoxy resins and acrylic emulsion) sales reached 5000 tons annually. Attentions The rollers,brushes and Other tools should be soaked into the water for about 5 minutes before constuction. A and B components should be mixed correctly and stired evenly before construction. The dilution proportioning should be chosen according to the construction temperature, Humidity and the appropriate viscosity should be made as the requirements. The mixture should be stired evenly and waited for a while, it should be used after 15 minutes. A component belongs to waterbase coatings which should not be polluted by organic solvents, B component should not be diluted by water. The coatings which has been mixed should be used in 4 hours, unfinished coat can’t be poured back into the previous package, it should be stoped using if appears thickened. The coatings should not be over-diluted no matter spary coat or roller coat in order to protect propertys of the film. Pay attention to the labor protection during the construction. Safety Keep the circulation of air during construction. Use protective masks, gloves and other protective tools to prevent skin or eyes from being contaminated and nose being absorped over amount of coating frog. Using lots of water to wash eyes if contaminated and ask doctors for help. Cover the tops of the products during the construction rest. Keep the products away from the children. Contact us if you need more details on 2k Epoxy Primer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Granite Epoxy Resin、Epoxy Resin 828. If these products fail to match your need, please contact us and we would like to provide relevant information.
abrasion resistance property
Great adhesive force
impact resistance
2k epoxy primer /granite epoxy resin/epoxy resin 828
Product Description Waterborne Epoxy White Primer Product Introduction Waterborne epoxy white primer has strong adhesion, low VOC and small odor. It’s safe, environmental, non-toxic, and has loose demand on construction environment. Technical Data Viscosity: 900-1500 m Pa·s Solid content:45-55% pH:8-9 Product Advantage 1. Excellent mechanical properties, e.g. 0 H of adhesion, 2 to 3 H of hardness. 2. Good adhesion between the layers. 3. Easy to control during construction. 4. Waterborne, non-toxic, environmental. Application The chassis of electronic products, e.g. mobile phone, computer. Applicable Range The chassis made of aluminum or magnalium. Construction Condition 1. Substrate: make sure there is no greasy dirt nor dust on the substrate of aluminum or magnalium (passivated or not passivated). 2. The temperature should be 5°C or higher, the relative humidity should be 85% or less. Construction Technology 1. Clean the substrate Clear greasy dirt on the surface away with cleaning agent or alcohol. 2. Paint waterborne epoxy white primer Knife coating or spray coating according to the required thickness. 3. As for the not passivated substrate, bake it under 150°C for 5 minutes, then let it be air dry. For the passivated substrate, let it be cured under room temperature. Attention 1. The greasy dirt on the substrate should be cleaned away. Otherwise, the adhesion will be influenced. 2. When knife coating or spray coating, the painting amount should be based on the required thickness 30-35um. Otherwise, too thin film decrease the adhesion. 3. Before paint, stir component A to be level, then match A with B strictly with the ratio A:B=4:1, mix them evenly. Use it after 3 to 5 minutes. 4. The amount for stirring once should be controlled based on the practical construction speed. Too much amount is not advisable. The paint should be run out in one hour. The leftover paint cannot be poured back into the original package. Otherwise, the coating will be thicker and out of run. Packaging & Shipping Package and Storage A component: 20 kg plastic drum B component: 5 kg plastic drum They should be stored under dry,shadow and cool place and the expiry date is 12 monthes under the normal temperature(20 °C/68 ) Our Services Sample-free for your testing, we also supply perfect tech-support, before-sale&after-sale service, tech-guide service etc.. if our products happen problems, we will undertake responsibility ourself. Company Information Tianyi Chemical Engineering Material Co., Ltd is an import&export science and technology intensive enterprise which focuses on researching and applications of silica dioxide powder. It is located in the prosperous and famous town of coatings ---Shunde,Guangdong,China. Adhering to the principle “Quality first, credit standing paramountcy, self-discipline and social commitment and integrity-based”, Tianyi Chemical specializes in independent R&D, application, production and sale of Matting agent, fumed silica, Zinc Stearate, water-base synthetic resins. It has become representative of excellent enterprises of researching&application in china and one of the main suppliers of chemical raw materials for coating and oil ink in china. Developed from the begining, Tianyi chemcial has been always carring on the marketing conception of “Technology leads sales”. Throughout years’ efforts, overseas sales centers, five big china domestic sales centers and a number of highly qualified sales teams are established. Our powder products sales amounted to 30,000 tons each year and aqueous synthetic resins (including waterbase polyurethane resins, waterbase epoxy resins and acrylic emulsion) sales reached 5000 tons annually. Attentions The rollers,brushes and Other tools should be soaked into the water for about 5 minutes before constuction. A and B components should be mixed correctly and stired evenly before construction. The dilution proportioning should be chosen according to the construction temperature, Humidity and the appropriate viscosity should be made as the requirements. The mixture should be stired evenly and waited for a while, it should be used after 15 minutes. A component belongs to waterbase coatings which should not be polluted by organic solvents, B component should not be diluted by water. The coatings which has been mixed should be used in 4 hours, unfinished coat can’t be poured back into the previous package, it should be stoped using if appears thickened. The coatings should not be over-diluted no matter spary coat or roller coat in order to protect propertys of the film. Pay attention to the labor protection during the construction. Safety Keep the circulation of air during construction. Use protective masks, gloves and other protective tools to prevent skin or eyes from being contaminated and nose being absorped over amount of coating frog. Using lots of water to wash eyes if contaminated and ask doctors for help. Cover the tops of the products during the construction rest. Keep the products away from the children. Contact us if you need more details on 2k Epoxy Primer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Granite Epoxy Resin、Epoxy Resin 828. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Water Based Epoxy Resin Hardener > For crack filler
Premium Related Products
Other Products
Hot Products
HS2255 2K Epoxy AdhesiveAnti Block of the Film Silicon Dioxide BV809High Quality Silicon Dioxide Factory Price B615High Quality High Purity Silica Powder B820Emulsion watersoluble Resin Paint HMP-1501Liquid Glue Latex Resin Textile HMP-1507Excellent Adhesion Resin for UV Ink HMP-1304hard segment resin with anti-scratch HMP1308Resin used for Paper for Wine BoxHMP-1301Non-yellowing Polyurethane Resin for Glass Coatings HMP-1203Full Coating Film Industry Resin for Furniture Top-Coat HMP-1012Good Adhesion Resin for Waterborne UV middle Paint for Wooden Door HMP-1011self leveling 3d epoxy resin flooring HMP2777A/HMP2777Bliquid plastic coating epoxy resin coating for wall paint primer HMP2788A/HMP2788BB611 Matting Agent Good Dispersionzinc chromate primer paints epoxy HMP2766A/HMP2766B