self leveling 3d Epoxy Resin
flooring HMP2777A/HMP2777B Product Description Component and Items HMP-2777A HMP-2777B Brief Introduction As the two-component flooring middle coating in the water-base epoxy flooring series, apply during the primer and surface coating, it can promote the anti-loading capacity and application life in the coating syestems. Product characters Good attachment with the paint film High hardness Anti-shocking Promote the coating system loading capacity and application life in the coating system Water-base product, safe and environmental, it is a ideal product and can instead of the traditional product. Technical data Color Yellowish or clients can demand the color Volume solid 41.3±1% ( 2777A : 2777B = 100 : 25 mix) Theroy coating rate For the epoxy coarse mortar, the coating rate is 1.6m²/kg( The rate is caculated after every component mixed). A:B:80Mesh quartz sand =100:25:30 (weight rate), Each millmetre Dry film thickness need 2777A 0.46kg, For the epoxy fine mortar, the coating rate is 2.0 m²/kg ( The rate is caculated after every component mixed) A:B:100 Mesh quartz = 100:25:200(weight rate) Each millmetre dry film thickness need 2777A 0.56kg, Remark, The actural coating rate is different as per different factor effection, such as the coating way, operation tool and the coated material surface level. Surface time ≤4hours (25°C,relative humidity≤85%) Re-coat interval ≥24hours(25°C,relative humidity≤85%) Dry film thickness 300-800µm(flat surface, one time) Corresponding system l Primer:HMP-2788 Highsun waterbase epoxy resin floor primer (Coat once) (HMP-2788A:HMP-2788B=3:1, weight ratio) l Middle coat:HMP-2777 Highsun epoxy floor middle coat (Coat once or twice) (HMP-2777A:HMP-2777B=4:1, weight ratio) l Finish: HMP-2766 Highsun epoxy floor finish( coat twice) (HMP-2766A:HMP-2766B=4:1, weight ratio) Operation guidance l Operation way scrape coat l Match rate(weight rate) A:B:water=100:25:0~10 l Cleaning tool Clean with water after construction l Construction condition The tempreture of the wall should be not lower than 8°C,moisture content below 10%, and air humidity not over 85% Base-floor processing lMaintain the new cement mortar floor over 5 weeks in the winter and 4 weeks in the summer. lClear the floor, and repair the floor with suggested epoxy cement motar. Maintain the putty layer over 2 days in the summer and 3 days in the winter. Attention l Mix the component A and component B exactly according to the proportion, and stir completely, and then place it for 20 minutes. If not strict to match, it will cause bad on the coating film even have the quality problem. l This is the water-base coating, it need invoid the organic solvent pollution l It need have necssary labor protection job during operation. Packaging & Shipping A component:20KG plastic barrel B component: 5KG plastic barrel Stored in a cool, dry and ventilated place, The shelf life in normal temperature could reach 12 month (20°C/68°F) Our Services Safety Item l Allow the air to circulate in the construction. l Please use mask and gloves to protect your skin, eyes or mouth from contamination of coating. l Please wash with plenty of water if it enter into your eyes. Call a doctor if it is necessary. l Cover the product on time during the rest time l Put it out of the reach of the children. FAQ
Company Information Tianyi Chemical Engineering Material Co., Ltd,located in Shunde,Guangdong,China. Specializes in R&D, Application, Production and Sale of Matting agent
, Fumed silica, Zinc Stearate
and Aqueous synthetic resins. We get approved ISO9001-2008 and all our chemicals owns Reach, ROHS certification. We have set up “Powder chemicals R&D centers”, “Aqueous synthetic resin R&D center”, “Paint and ink applications R&D center ", “Paper and leather applications R&D center"successively. The productive capacity of powder chemicals and aqueous synthetic resin are 40,000 tons and 80,000 tons annually.Our chemicals are mainly exported to Europe (Italy, Russia), Mid-east (UAE,Turkey, Egypt,Pakistan), Southeast Asia (Indonesia,Vietnam,Thailand,Philippines), South America(Columbia,Venezuela,Ecuador,Chile), North America(Mexico), Africa(Ghana,Nigeria,Tunisia) and we do business with some multinationals like Varlspar and Sherwim-Williams. We win high reputation and honesty from our customers because of excellent products performance. We strongly believe we are your best choice. Trade Shows
Contact us if you need more details on Self Leveling Epoxy Flooring. We are ready to answer your questions on packaging, logistics, certification or any Other
aspects about 3d Flooring Epoxy、Epoxy Resin Flooring. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Water Based Epoxy Resin Hardener > For Flooring Coating