zinc chromate primer paints epoxy HMP2766A/HMP2766B

Epoxy Resin/Granite Epoxy Resin/epoxy resin 828
   zinc chromate primer paints epoxy  HMP2766A/HMP2766B     Product Description  Product type A component: HMP-2766A   B component: HMP-2766B     Product Introduction   The product is 2 component system waterbase epoxy flooring paint, which is suitable for cement(-sand) mortar floor.   Product Highlights   Excellent abrasion resistance property.   Great adhesive force.   Good impact resistance and high hardness.   High fullness and decorative performance.   Waterbase and pro-environmental product, which is a good choice for traditional   Solventbase series product.     Technique Data    Colour       all kinds of color    Solid Content   45.0±1%(A:B=4:1 construction ratio)    Theoretic Coating Rate: about 8-9 m²/kg (flat surface, coat once,practical coat rate is    different according to different factors like coating method, construction tools, dilution ratio    and flat performance of the coated surface.)    Surface drying time ≤4 hours(25°C,relative humidity ≤85%)    Recoat interval ≥8 hours (25°C,relative humidity ≤85%)    Practical drying film thickness: 40µm (flat surface, coat once)      Mating System    Primer coat: Highsun waterbase epoxy flooring primer coat.(once) (HMP-2788A:HMP-2788B=3:1)     Middle coat: Highsun waterbase epoxy flooring middle coat.(1-2 times)     (HMP-2777A: HMP-2777B = 4:1 weight ration)     Top finish coating: Highsun waterbase epoxy flooring top finish coat.(twice)     HMP-2766A: HMP-2766B = 4:1 weight ratio)     Construction methods   Roller coating       2.Brush coating       3. Curtain coating   Construction tools   1. Rollers 2. Hairbrush 3.Airbrush   Dilution methods Clear water (0-5%)   Tools washing way   Using clear water to wash immediately after construction.   Construction conditions The temperature of walls should not be below 8°C during    the construction, moisture content be less than 10%,air humidity≤85%.     Base materials treatment   Thebase materials surface (flooring surface) should be sanded evenly and got rid of   powder dust, rust, oil stain and Other impurity materials for 4 weeks protective cement or   cement mortar flooring. If crackness or damage are appeared on the surface, it should be   recoated using the same materials as previous base materials, the protective period   should be over 1 week after recoating.     Working procedure guidance    The treatment for base materials.    Construct HMP2788 epoxy primer once.    Construct middle coat HMP2777 as your practical requirement.    Construct HMP2766 Epoxy top finish once or twice.          Packaging & Shipping     Package and Storage   A component: 20 kg plastic drum   B component: 5 kg plastic drum   They should be stored under dry,shadow and cool place and the expiry date is 12   monthes under the normal temperature(20 °C/68 )     Our Services   Sample-free for your testing, we also supply perfect tech-support, before-sale&after-sale service, tech-guide service etc.. if our products happen problems, we will undertake responsibility ourself.         Company Information     Tianyi Chemical Engineering Material Co., Ltd is an import&export science and technology intensive enterprise which focuses on researching and applications of silica dioxide powder. It is located in the prosperous and famous town of coatings ---Shunde,Guangdong,China.     Adhering to the principle “Quality first, credit standing  paramountcy, self-discipline and social commitment and integrity-based”, Tianyi Chemical specializes in independent R&D, application, production and sale of Matting agent, fumed silica, Zinc Stearate, water-base synthetic resins. It has become representative of excellent enterprises of researching&application in china and one of the main suppliers of chemical raw materials for coating and oil ink in china.   Developed from the begining, Tianyi chemcial has been always carring on the marketing conception of “Technology leads sales”. Throughout years’ efforts, overseas sales centers, five big china domestic sales centers and a number of highly qualified sales teams are established. Our powder products sales amounted to 30,000 tons each year and aqueous synthetic resins (including waterbase polyurethane resins, waterbase epoxy resins and acrylic emulsion) sales reached 5000 tons annually.           Attentions   The rollers,brushes and other tools should be soaked into the water for about 5   minutes before constuction.   A and B components should be mixed correctly and stired evenly before construction.   The dilution proportioning should be chosen according to the construction temperature,   Humidity and the appropriate viscosity should be made as the requirements. The mixture   should be stired evenly and waited for a while, it should be used after 15 minutes.   A component belongs to waterbase coatings which should not be polluted by organic   solvents, B component should not be diluted by water.   The coatings which has been mixed should be used in 4 hours, unfinished coat can’t   be poured back into the previous package, it should be stoped using if appears thickened.   The coatings should not be over-diluted no matter spary coat or roller coat in order to   protect propertys of the film.   Pay attention to the labor protection during the construction.   Safety   Keep the circulation of air during construction.   Use protective masks, gloves and other protective tools to prevent skin or eyes from   being contaminated and nose being absorped over amount of coating frog.   Using lots of water to wash eyes if contaminated and ask doctors for help.   FAQ   Trade Shows     Cover the tops of the products during the construction rest.   Keep the products away from the children.     Company Information Tianyi Chemical Engineering Material Co., Ltd, located in Shunde, Guangdong, China. Specializes in R&D, Application, Production and Sale of Matting Agent, Fumed silica, Zinc stearate and Aqueous synthetic resins. We get approved ISO9001-2008 and all our chemicals owns Reach, ROHS certification.   We have set up “Powder chemicals R&D centers”, “Aqueous synthetic resin R&D center”, “Paint and ink applications R&D center ", “Paper and leather applications R&D center"successively.   The productive capacity of powder chemicals and aqueous synthetic resin get 40,000 tons and 80,000 tons annually.   Our chemicals are mainly exported to Europe (Italy, Russia), Mid-east (UAE,Turkey, Egypt,Pakistan), Southeast Asia (Indonesia,Vietnam,Thailand,Philippines), South America(Columbia,Venezuela,Ecuador,Chile), North  America(Mexico),  Africa(Ghana,Nigeria,Tunisia) and we do business with some multinationals like Varlspar and Sherwim-Williams.   We win high reputation and honesty from our customers because of excellent products performance. We strongly believe we are your best choice.  

Contact us if you need more details on Zinc Chromate Primer Paint. We are ready to answer your questions on packaging, logistics, certification or any other aspects about 2k Epoxy Primer、Paints Epoxy. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Zinc Stearate > Paint Coating Grade