Tp550-Matting Agent for Powder Coating
Basic Info
Model No.: Tp550
Product Description
Model NO.: Tp550 Kind: Powder Coating Application: Appliance Paint Origin: China Environmental Protection: Yes Appearance: Powder Trademark: TP
TP550-Matting agent FOR POWDER COATING
General Desription:
Matting Agent TP550 is a kind of polymer with epoxied mass.It has good outdoor performance.It is used for curing polyester resin and reducing powder coating gloss like B68.
The lowest gloss can reach 5°(60 angle conner) and could setup the gloss degree by adding its quantity.
In china it is used widely in polyester type powder coating.
Typical properties:
Referenced formulation:
Condition: 200ºC 10-12 minutes
Result: Gloss 3-5°,Impact:50kgf pass
Package, storage and Other precautions:
1. Store in a cool and dry place to avoid contacting other chemical products. Seal tightly after
using. As this product is irritant to respiratory tract, please wear dustproof mask and glove when operating.
2. Package: 20kgs/polyethylene-lined kraft paper-plastic compound bag.
3. Validity will be 2 years under normal temperature.
Put some tgic in order to reach sightly higher gloss level.
Contact us if you need more details on Polyester Hardener. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Powder Coating Hardener、Titanium Dioxide. If these products fail to match your need, please contact us and we would like to provide relevant information.
TP550-Matting agent FOR POWDER COATING
General Desription:
Matting Agent TP550 is a kind of polymer with epoxied mass.It has good outdoor performance.It is used for curing polyester resin and reducing powder coating gloss like B68.
The lowest gloss can reach 5°(60 angle conner) and could setup the gloss degree by adding its quantity.
In china it is used widely in polyester type powder coating.
Typical properties:
| Appearance | transparent grain or white powder. |
| Epoxy equivlent | 650-750g/eq |
| Soft point | 110-125ºC |
| Viscosity | 220c/pa.s |
| Volatile | 1%max |
Referenced formulation:
| Polyester resin(35mgKOH/g) | 34 |
| TP550 | 11 |
| TP88 | 1.3 |
| TGIC | 0.40% |
| TiO2 | 16 |
| BaSO4 | 13 |
| Accelerant | 1.1 |
Condition: 200ºC 10-12 minutes
Result: Gloss 3-5°,Impact:50kgf pass
Package, storage and Other precautions:
1. Store in a cool and dry place to avoid contacting other chemical products. Seal tightly after
using. As this product is irritant to respiratory tract, please wear dustproof mask and glove when operating.
2. Package: 20kgs/polyethylene-lined kraft paper-plastic compound bag.
3. Validity will be 2 years under normal temperature.
Put some tgic in order to reach sightly higher gloss level.
Contact us if you need more details on Polyester Hardener. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Powder Coating Hardener、Titanium Dioxide. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : MATT HARDENER > Others MATT HARDENER
Other Products
Hot Products
HS2255 2K Epoxy AdhesiveAnti Block of the Film Silicon Dioxide BV809High Quality Silicon Dioxide Factory Price B615High Quality High Purity Silica Powder B820Emulsion watersoluble Resin Paint HMP-1501Liquid Glue Latex Resin Textile HMP-1507Excellent Adhesion Resin for UV Ink HMP-1304hard segment resin with anti-scratch HMP1308Resin used for Paper for Wine BoxHMP-1301Non-yellowing Polyurethane Resin for Glass Coatings HMP-1203Full Coating Film Industry Resin for Furniture Top-Coat HMP-1012Good Adhesion Resin for Waterborne UV middle Paint for Wooden Door HMP-1011self leveling 3d epoxy resin flooring HMP2777A/HMP2777Bliquid plastic coating epoxy resin coating for wall paint primer HMP2788A/HMP2788BB611 Matting Agent Good Dispersionzinc chromate primer paints epoxy HMP2766A/HMP2766B