Narmal Temperature Curing Epoxy Resin two part epoxy

Narmal Temperature Curing Epoxy Resin two part epoxy EA-143

EA-143 is not only fast at room temperature, but also fully cured at a temperature of-10°C.

Product Description

1. The product picture is as above

2. Product features and applications

This product is transparent high strength toughness room temperature curing two-component epoxy adhesive. It is not only fast at room temperature, but also fully cured at a temperature of-10°C.It can be widely used in the positioning and bonding of construction, automotive parts, electronic components, ceramics, glass and Other industries and materials.This product is transparent, high strength, toughness, room temperature and curing two-component epoxy adhesive. It is not only fast at room temperature, but also fully cured at a temperature of-10°C. It can be widely used in the positioning and bonding of construction, automotive parts, electronic components, ceramics, glass and other industries and materials. The curing material has excellent water resistance, oil resistance and chemical resistance performance.

3. Main technical datas

Notes: The above performance data are based in 25±2 ℃ and relative humidity 50 ± 5%.

4. How to Use

1. Two components of A / B must be fully mixed according to the weight ratio of A: B=1:1. It can be done with a double glue gun.

2. Clean the surface, clean the glued or coated surface, and remove rust, dust and oil pollution.

3. The adhesive shall be clamped immediately. The uniform contact pressure will ensure the maximum bonding strength. The adhesive thickness shall be 0.5mm. To obtain the highest mechanical strength, the material surface can be polished, and then the surface shall be scrubbed with a special solvent. The adhesive site shall be coated on both sides, and then the adhesive part shall be fixed.

5. Storage and Transportation

1. Keep it away from the children.If accidentally contact skin, wipe clean and rinse with water; if accidentally contact eyes, rinse with water and go to the hospital for examination.

2. The product shall be sealed and stored in a cool, dry and ventilated place (5℃ ~25℃).Prevent the rain and sun exposure.The storage period is 6 months.

3. After the product is opened, try to use it as once as possible. The unused products should be sealed in a safe place.

4. This product has a slightly stimulating smell, and it should be used in well-ventilated places when using the product extensively.Please wear gas mask and corrosion gloves.

5. This product is non-dangerous goods, and can be stored and transported according to general chemicals.

6. Packing

This product is packed in 50ml double tube (60pcs/ctn).

There are much more categories in our website, such as One-Component RTV Silicone Sealant, RTV silicone, Thermal paste, thermal paste for cpu, Thermal Grease, thermal paste for cpu,Thermal Pad, best thermal pads, Potting Glue, Electrical potting compound. And there are more items are not showing on the website, please contact us directly for more information.

WARM REMINDER: Thank you for your trust and support of our products. Due to the diversity of practical applications, we cannot grasp the application conditions. Therefore, please have a test before confirm if it meets your requirements and avoid unnecessary waste and loss. We do not guarantee the issues under specific conditions, do not assume any direct, indirect or accidental responsibility. If you have any questions, please contact us, and we will make a solution for you. Service hotline: 400 168 3323