Epoxy HMP2766A / HMP2766B
Basic Info
Model No.: HMP2766A / HMP2766B
Product Description
Specifications Epoxy HMP2766A / HMP2766B
1.Two-component waterbased epoxy floor primer.
2.For concrete,cement mortar
Epoxy HMP2766A / HMP2766B Product Description Product type A component:HMP-2766A B component: HMP-2766A Product Introduction: The product is 2 component system waterbase epoxy flooring paint, which is suitable for cement(-sand) mortar floor. Product Highlights: 1. Excellent abrasion resistance property. 2. Great adhesive force. 3. Good impact resistance and high hardness. 4. High fullness and decorative performance. 5. Waterbase and pro-environmental product, which is a good choice for traditional Solventbase series product. Technique Data: 1.Colour all kinds of color 2.Solid Content 45.0±1%(A:B=4:1 construction ratio) 3.Theoretic Coating Rate: about 8-9 m²/kg (flat surface, coat once,practical coat rate is different according to different factors like coating method, construction tools, dilution ratio and flat performance of the coated surface.) 4. Surface drying time ≤4 hours(25°C,relative humidity ≤85%) 5. Recoat interval ≥8 hours (25°C,relative humidity ≤85%) 6. Practical drying film thickness: 40µm (flat surface, coat once) FAQ Mating System 1. Primer coat: Highsun waterbase epoxy flooring primer coat.(once) (HMP-2788A:HMP-2788B=3:1) 2. Middle coat: Highsun waterbase epoxy flooring middle coat.(1-2 times) (HMP-2777A:HMP-2777B = 4:1 weight ration) 3. Top finish coating: Highsun waterbase epoxy flooring top finish coat.(twice) (HMP-2766A:HMP-2766B = 4:1 weight ratio) Construction methods 1. Roller coating 2.Brush coating 3. Curtain coating Construction tools 1. Rollers 2. Hairbrush 3.Airbrush Dilution methods Clear water (0-5%) Tools washing way Using clear water to wash immediately after construction. Construction conditions The temperature of walls should not be below 8°C during the construction, moisture content be less than 10%,air humidity≤85%. Base materials treatment Thebase materials surface (flooring surface) should be sanded evenly and got rid of powder dust, rust, oil stain and Other impurity materials for 4 weeks protective cement or cement mortar flooring. If crackness or damage are appeared on the surface, it should be recoated using the same materials as previous base materials, the protective period should be over 1 week after recoating. Working procedure guidance 1. The treatment for base materials. 2. Construct HMP2788 epoxy primer once. 3. Construct middle coat HMP2777 as your practical requirement. 4. Construct HMP2766 Epoxy top finish once or twice. Package and Storage A component: 20 kg plastic drum B component: 5 kg plastic drum They should be stored under dry,shadow and cool place and the expiry date is 12 monthes under the normal temperature(20°C/68°F) Attentions 1. The rollers,brushes and other tools should be soaked into the water for about 5 minutes before constuction. 2. A and B components should be mixed correctly and stired evenly before construction.The dilution proportioning should be chosen according to the construction temperature, Humidity and the appropriate viscosity should be made as the requirements. The mixture should be stired evenly and waited for a while, it should be used after 15 minutes. 3. A component belongs to waterbase coatings which should not be polluted by organic solvents, B component should not be diluted by water. 4. The coatings which has been mixed should be used in 4 hours, unfinished coat can’t be poured back into the previous package, it should be stoped using if appears thickened. 5. The coatings should not be over-diluted no matter spary coat or roller coat in order to protect propertys of the film. 6. Pay attention to the labor protection during the construction. Safety 1. Keep the circulation of air during construction. 2. Use protective masks, gloves and other protective tools to prevent skin or eyes from being contaminated and nose being absorped over amount of coating frog. 3. Using lots of water to wash eyes if contaminated and ask doctors for help. 4. Cover the tops of the products during the construction rest. 5. Keep the products away from the children. Packaging & Shipping Package and Storage A component: 20 kg plastic drum B component: 6 kg plastic drum They should be stored under dry,shadow and cool place and the expiry date is 12 monthes under the normal temperature(20°C/68°F) Company Information Company Information Tianyi Chemical Engineering Material Co., Ltd,located in Shunde,Guangdong,China. Specializes in R&D, Application, Production and Sale of Matting agent, Fumed silica, Zinc Stearate and Aqueous synthetic resins. We get approved ISO9001-2008 and all our chemicals owns Reach, ROHS certification. We have set up “Powder chemicals R&D centers”, “Aqueous synthetic resin R&D center”, “Paint and ink applications R&D center ", “Paper and leather applications R&D center"successively. The productive capacity of powder chemicals and aqueous synthetic resin get 40,000 tons and 80,000 tons annually. Our chemicals are mainly exported to Europe (Italy, Russia), Mid-east (UAE,Turkey, Egypt,Pakistan), Southeast Asia (Indonesia,Vietnam,Thailand,Philippines), South America(Columbia,Venezuela,Ecuador,Chile), North America(Mexico), Africa(Ghana,Nigeria,Tunisia) and we do business with some multinationals like Varlspar and Sherwim-Williams. We win high reputation and honesty from our customers because of excellent products performance. We strongly believe we are your best choice. Contact us if you need more details on Floor Surface Paint. We are ready to answer your questions on packaging, logistics, certification or any other aspects about 2k Self-leveling Floor Paint、Floor Surface Paint. If these products fail to match your need, please contact us and we would like to provide relevant information.
1.Two-component waterbased epoxy floor primer.
2.For concrete,cement mortar
Epoxy HMP2766A / HMP2766B Product Description Product type A component:HMP-2766A B component: HMP-2766A Product Introduction: The product is 2 component system waterbase epoxy flooring paint, which is suitable for cement(-sand) mortar floor. Product Highlights: 1. Excellent abrasion resistance property. 2. Great adhesive force. 3. Good impact resistance and high hardness. 4. High fullness and decorative performance. 5. Waterbase and pro-environmental product, which is a good choice for traditional Solventbase series product. Technique Data: 1.Colour all kinds of color 2.Solid Content 45.0±1%(A:B=4:1 construction ratio) 3.Theoretic Coating Rate: about 8-9 m²/kg (flat surface, coat once,practical coat rate is different according to different factors like coating method, construction tools, dilution ratio and flat performance of the coated surface.) 4. Surface drying time ≤4 hours(25°C,relative humidity ≤85%) 5. Recoat interval ≥8 hours (25°C,relative humidity ≤85%) 6. Practical drying film thickness: 40µm (flat surface, coat once) FAQ Mating System 1. Primer coat: Highsun waterbase epoxy flooring primer coat.(once) (HMP-2788A:HMP-2788B=3:1) 2. Middle coat: Highsun waterbase epoxy flooring middle coat.(1-2 times) (HMP-2777A:HMP-2777B = 4:1 weight ration) 3. Top finish coating: Highsun waterbase epoxy flooring top finish coat.(twice) (HMP-2766A:HMP-2766B = 4:1 weight ratio) Construction methods 1. Roller coating 2.Brush coating 3. Curtain coating Construction tools 1. Rollers 2. Hairbrush 3.Airbrush Dilution methods Clear water (0-5%) Tools washing way Using clear water to wash immediately after construction. Construction conditions The temperature of walls should not be below 8°C during the construction, moisture content be less than 10%,air humidity≤85%. Base materials treatment Thebase materials surface (flooring surface) should be sanded evenly and got rid of powder dust, rust, oil stain and Other impurity materials for 4 weeks protective cement or cement mortar flooring. If crackness or damage are appeared on the surface, it should be recoated using the same materials as previous base materials, the protective period should be over 1 week after recoating. Working procedure guidance 1. The treatment for base materials. 2. Construct HMP2788 epoxy primer once. 3. Construct middle coat HMP2777 as your practical requirement. 4. Construct HMP2766 Epoxy top finish once or twice. Package and Storage A component: 20 kg plastic drum B component: 5 kg plastic drum They should be stored under dry,shadow and cool place and the expiry date is 12 monthes under the normal temperature(20°C/68°F) Attentions 1. The rollers,brushes and other tools should be soaked into the water for about 5 minutes before constuction. 2. A and B components should be mixed correctly and stired evenly before construction.The dilution proportioning should be chosen according to the construction temperature, Humidity and the appropriate viscosity should be made as the requirements. The mixture should be stired evenly and waited for a while, it should be used after 15 minutes. 3. A component belongs to waterbase coatings which should not be polluted by organic solvents, B component should not be diluted by water. 4. The coatings which has been mixed should be used in 4 hours, unfinished coat can’t be poured back into the previous package, it should be stoped using if appears thickened. 5. The coatings should not be over-diluted no matter spary coat or roller coat in order to protect propertys of the film. 6. Pay attention to the labor protection during the construction. Safety 1. Keep the circulation of air during construction. 2. Use protective masks, gloves and other protective tools to prevent skin or eyes from being contaminated and nose being absorped over amount of coating frog. 3. Using lots of water to wash eyes if contaminated and ask doctors for help. 4. Cover the tops of the products during the construction rest. 5. Keep the products away from the children. Packaging & Shipping Package and Storage A component: 20 kg plastic drum B component: 6 kg plastic drum They should be stored under dry,shadow and cool place and the expiry date is 12 monthes under the normal temperature(20°C/68°F) Company Information Company Information Tianyi Chemical Engineering Material Co., Ltd,located in Shunde,Guangdong,China. Specializes in R&D, Application, Production and Sale of Matting agent, Fumed silica, Zinc Stearate and Aqueous synthetic resins. We get approved ISO9001-2008 and all our chemicals owns Reach, ROHS certification. We have set up “Powder chemicals R&D centers”, “Aqueous synthetic resin R&D center”, “Paint and ink applications R&D center ", “Paper and leather applications R&D center"successively. The productive capacity of powder chemicals and aqueous synthetic resin get 40,000 tons and 80,000 tons annually. Our chemicals are mainly exported to Europe (Italy, Russia), Mid-east (UAE,Turkey, Egypt,Pakistan), Southeast Asia (Indonesia,Vietnam,Thailand,Philippines), South America(Columbia,Venezuela,Ecuador,Chile), North America(Mexico), Africa(Ghana,Nigeria,Tunisia) and we do business with some multinationals like Varlspar and Sherwim-Williams. We win high reputation and honesty from our customers because of excellent products performance. We strongly believe we are your best choice. Contact us if you need more details on Floor Surface Paint. We are ready to answer your questions on packaging, logistics, certification or any other aspects about 2k Self-leveling Floor Paint、Floor Surface Paint. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : HMP Water Based Polyurethane
Other Products
Hot Products
HS2255 2K Epoxy AdhesiveAnti Block of the Film Silicon Dioxide BV809High Quality Silicon Dioxide Factory Price B615High Quality High Purity Silica Powder B820Emulsion watersoluble Resin Paint HMP-1501Liquid Glue Latex Resin Textile HMP-1507Excellent Adhesion Resin for UV Ink HMP-1304hard segment resin with anti-scratch HMP1308Resin used for Paper for Wine BoxHMP-1301Non-yellowing Polyurethane Resin for Glass Coatings HMP-1203Full Coating Film Industry Resin for Furniture Top-Coat HMP-1012Good Adhesion Resin for Waterborne UV middle Paint for Wooden Door HMP-1011self leveling 3d epoxy resin flooring HMP2777A/HMP2777Bliquid plastic coating epoxy resin coating for wall paint primer HMP2788A/HMP2788BB611 Matting Agent Good Dispersionzinc chromate primer paints epoxy HMP2766A/HMP2766B